Azide

5(6)-Carboxyrhodamine 110 Azide
Excitation source: 350 nm laser line
Filter set: DAPI

Blue-emitting, azide-activated fluorescent probes used imaging alkyne targets via copper-catalyzed click reaction (CuAAC).

A water-soluble, blue emitting dye routinely used for imaging alkyne-tagged biomolecules via CuAAC or Cu-free click reaction.
5(6)-Carboxyrhodamine 110 Azide
Excitation source: 407 nm laser line
Filter set: DAPI

Azide-activated fluorescent probes ideally suited for the 407 nm spectral line of the krypton laser or the 408 nm violet laser diode.

A bright, azide-activated probe ideally suited for the 407 nm spectral line of the krypton laser or the 408 nm violet laser diode.
5(6)-Carboxyrhodamine 110 Azide
Excitation source: 432 nm laser line
Filter set: FITC

Green-fluorescent alkyne detection probes with excitation near 432 nm and emission maximum at 539 nm.

An azide-activated, water-soluble green emitting dye with excitation maximum at 432 nm and emission maximum at 539 nm
5(6)-Carboxyrhodamine 110 Azide
Excitation source: 488 nm laser line
Filter set: FITC

Green-fluorescent alkyne imaging probes ideally suited forĀ  488 nm light source of Agron-ion laser.

A bright, pH insensitive, green-fluorescent probe used for imaging alkyne-containing targets via CuAAC.
A hydrophilic and bright green-emitting probe used for imaging alkyne-tagged biomolecule through CuAAC.
A water-soluble, bright, green-emitting dye used for imaging low abundance alkyne-containing targets.
A bright, green-emitting dye used for imaging alkyne-containing targets via a copper-catalyzed click reaction.
5(6)-Carboxyrhodamine 110 Azide
Excitation source: 532 nm laser line
Filter set: TRITC

Azide-activated, yellow-fluorescent probes with excitation matching the frequency-doubled Nd:YAG laser line.

An azide-activated, water-soluble yellow emitting probe used for detection low abundance alkyne-containing biomolecules.
5(6)-Carboxyrhodamine 110 Azide
Excitation source: 532 nm laser line
Filter set: TRITC

Orange-fluorescent dyes with excitation matching 543 nm laser lines.

An azide-activated, water-soluble orange-emitting probe used for detection alkyne-containing biomolecules.
A bright and hydrophilic orange-emitting probe predominantly used for imaging alkyne-tagged biomolecule through CuAAC.
An orange-flourescent, azide-acivated probe used with 532 nm or 546 nm laser lines.
5(6)-Carboxyrhodamine 110 Azide
Excitation source: 532 nm laser line
Filter set: TRITC

Cyanine-based, orange-fluorescent dyes with excitation maximum near 555 nm.

An azide-activated, water-soluble far red-fluorescent probe used with 532 nm or 555 nm laser lines.
A bright and photostable orange-fluorescent probe used for imaging of low-to-moderate abundance alkyne-tagged biomolecules.
5(6)-Carboxyrhodamine 110 Azide
Excitation source: 568 nm laser line
Filter set: Texas Red

Orange-fluorescent, azide-activated probes used for detection alkynes or cyclooctynes.

An azide-activated, water-soluble orange emitting probe used with the 568 nm laser line on the Ar-Kr mixed-gas laser.
5(6)-Carboxyrhodamine 110 Azide
Excitation source: 568 nm or 594 nm laser line
Filter set: Texas Red

Red-fluorescent aizde probes with excitation matching 594 nm laser lines.

An azide-activated, water-soluble red-fluorescent probe used with the Ar-Kr mixed-gas laser.
An azide-activated, red emitting probe predominantly used for imaging alkyne-tagged biomolecule through CuAAC.
5(6)-Carboxyrhodamine 110 Azide
Excitation source: 633 or 647 nm laser line
Filter set: Cy5

Far-red-fluorescent, azide-activated dyes for imaging of alkyne targets ideally suited for 633 nm or 647 nm laser lines.

A bright and photostable far-red-fluorescent probe used for imaging of low-to-moderate abundance alkyne targets.
A hydrophilic, azide-activated, far-red-fluorescent probe used with 633 nm or 647 nm laser lines.
An azide-activated, water-soluble far red-fluorescent probe used with 633 nm or 647 nm laser lines.
5(6)-Carboxyrhodamine 110 Azide
Excitation source: 633 nm or 647 nm laser line.
Filter set: Cy5.5

Near-IR fluorescent probes for alkyne-tagged biomolecules imaging via CuAAC.

Water-soluble, near-IR fluorescent probe for imaging alkyne-tagged biomolecules.
5(6)-Carboxyrhodamine 110 Azide
Excitation source: 633 nm or 647 nm laser line.
Filter set: Cy7

Azide-activated near-IR fluorescent dyes used for imaging alkyne-tagged biomolecules via CuAAC.

A hydrophilic near-IR probe predominantly used for detection of terminal alkyne-tagged biomolecules via a copper-catalyzed click reaction (CuAAC).